Azpects EasyJoint Pro Carbon

Azpects EasyJoint Pro Carbon is a two-part paving jointing compound designed for patios, driveways, paths and landscaping projects where a strong, clean and professional finish is needed. Suitable for porcelain, sandstone, concrete paving and driveway paving, EasyJoint Pro Carbon gives a distinctive Carbon joint finish while offering excellent durability for heavier-use areas.

New to the EASYJoint PRO range for 2026, Carbon gives customers another colour option while retaining the same high-performance two-part epoxy system used across the PRO range.

Unlike standard EASYJoint, EASYJoint PRO is not ready-mixed. It is a two-part system made up of coated sand and a separate activator, which must be mixed together before use. Once mixed, the product becomes a pourable slurry that is worked into the paving joints.

After mixing, the curing process begins, so any mixed product cannot be stored for future use. This makes correct preparation important before opening and mixing the tub.

Product Specification

Size: 17kg tub

Colour: Carbon

Type: Two-part epoxy resin jointing compound

Coverage: Approximately 10m² per tub based on patio slabs of 600mm x 600mm with a joint depth of 20mm and width of 10mm

Suitable for: Driveways, patios, pathways and light commercial paved areas

Application: Must be mixed with supplied activator before use

Why Choose Azpects EASYJoint PRO Carbon

• High-performance two-part formulation for heavy-duty applications
• Carbon colour option in the EASYJoint PRO range
• Suitable for driveways, patios and pathways
• Stronger and more durable than standard single-component jointing compounds
• Frost-resistant and durable once cured
• Ideal for trade and DIY projects alike

Important Installation Information

Azpects EASYJoint PRO Carbon must be mixed before use. It is not a ready-mixed brush-in compound.

The product is supplied as a two-part system:

• Coated sand inside the tub
• Separate activator bottle inside the tub

Before application, the coated sand should be mixed first until free-flowing and lump-free. The full bottle of activator is then added to the tub and mixed thoroughly until the compound reaches a creamy, free-flowing consistency.

The mixed slurry should then be poured onto pre-wetted paving and worked into the joints using a squeegee or broom. The paving should be damp before application, but the surface should not be flooded with water. Excessive water can affect the curing process and may weaken the finished joint or leave residue on the paving surface.

Once mixed, Azpects EASYJoint PRO Carbon cannot be stored for later use. The product will begin to cure after the activator has been added.

Always follow the official Azpects installation guidance before use.

Key Benefits

• Two-part epoxy system for a stronger, longer-lasting finish
• Suitable for heavy-use paving areas
• Suitable for trade and DIY projects alike
• Backed by UK Building Supplies service, sourcing and support

UK Building Supplies is a delivery-only service.

See our other accessories here

View the video of how to use Azpects Easy Joint Pro here

Buy with confidence — all our products are brand new and sourced direct from trusted suppliers, with items shown as in stock to allow customers to place orders as and when needed. We do not display live stock quantities so availability may vary. Please note: Packaging may vary from the image shown, but the product supplied will be the same.